Power line Type2 SPD PUSA for Photovoltaic system

PUSA-0640-YS, PUSA-1040-YS, PUSA-1540-YS

Modular multipole SPD with three-step d.c. switching device for PV system with remote signalling contact for monitoring device (floating changeover contact).

Features

Modularmultipole SPD with three-step d.c. switching device for PV system with remote signalling contact for monitoring device (floating changeover contact). EU RoHS Compliant with regulated substances.

Type

PUSA-0640-YS
PUSA-1040-YS
PUSA-1540-YS

Specification

Type	PUSA-0640-YS	PUSA-1040-YS	PUSA-1540-YS
SPD according to EN 50539-11	type2
Max. PV voltage (Ucpv)	660V	1060V	1500V
Short-circuit current rating (Iscpv)	10kA	10kA	10kA
Nominal discharge current (8/20μs) (In) (L-L) , (L-PE)	20kA	20kA	10kA
Max.discharge current (8/20μs) (Imax) (L-L) , (L-PE)	40kA
Voltage protection level (Up) (L-L) , (L-PE)	≦2.5kV	≦4.0kV	≦5.0kV
Response time (tA)	≦25ns
Operating temperature range (Tu)	-40℃～ +85℃
Operating state / fault indication	green / red
Cross-sectional area (min.)	6mm² solid / flexible
Cross-sectional area (max.)	35mm² stranded / 25mm² flexible
For mounting on	35mm DIN rails acc. To EN 60715
Enclosure material	thermoplastic, UL 94 V-0
Place of installation	Indoor installations
Degree of protection	IP 20
Capacity	3 module(s) DIN 43880
Conformity to environment	Comply to RoHS requirement
Type of remote signalling contact	changeover contact
a.c. switching capacity	250V / 1A, 125V / 3A
Cross-sectional area for remote signalling terminals	Stranded : 0.05mm² to 2.5mm² Rigid : Max. φ1.2mm

Purpose

Protects equipment from lightning surges entering the power supply (for induced lightning).
Type2 SPD (surge arrestor, arrester) for power supply.
For PV solar power generation (DC), 600V DC, 1000V DC, 1500V DC

Products

Power line Type2 SPD PUSA for Photovoltaic system

Features

Type

Specification

Purpose

Dimension drawing